Discover all the steps for installing your Twist'Air airbag and using it for the first time.
1. First, remove the stirrup leathers.
2. Thread the two Leash loops through the stirrup bars and put the stirrup leathers back in place. Make sure both Leash straps are securely fastened.
3. Once the Leash is installed on the saddle, you do not need to remove it; it can stay on your saddle.
4. Once on the horse with your vest on, connect the Leash to your airbag vest. To do this, attach the automatic release system (red) to the strap protruding from your vest. This patented magnetic attachment system is very easy to attach and detach from your vest.
Remember to detach the Leash from your airbag vest when you dismount to avoid triggering the airbag.
5. The Leash must be fully taut when you are standing in your stirrups. You can adjust the length of the Leash by sliding it through the loop.
You can also refer to the table below, using the horse’s height at the withers, to set the Leash length. The Leash length is measured between the ball and the junction of the two straps connected to the stirrup bars.
Ensure that the leash is properly adjusted to allow the airbag to deploy correctly. Incorrect adjustment of the leash length may cause the airbag to deploy too late.
Accumulate points with each purchase and enjoy exclusive benefits.
Within 48 hours in mainland France from €160 of purchases.
Returns and exchanges offered within 14 days in mainland France.
We repair your garment free of charge to allow you to get back in the saddle.
