Discover all the steps to install your Twist'Air Airbag and use it for the first time.
Using Your Twist’Air Airbag for the First Time
ATTACH THE LEASH TO THE SADDLE
- First, remove the stirrup leathers.
- Pass the 2 loops of the Leash through the stirrup bars and put the stirrup leathers back in place. Make sure that both straps of the Leash are securely attached.
- Once the Leash is installed on the saddle, you don't need to remove it, it can stay on your saddle.
ATTACH THE LEASH TO YOUR AIRBAG VEST
4. Once on the horse with your vest on, connect the Leash to your airbag vest. To do this, attach the automatic attachment system (red) to the strap protruding from your vest. This patented magnetic attachment system is very easy to attach and detach from your vest.
Don't forget to detach the Leash from your airbag vest when you dismount to avoid activating the airbag.
ADJUST THE LENGTH OF THE LEASH
5. The Leash should be completely taut when you stand up in your stirrups. You can adjust the length of the Leash by sliding it through the loop.
You can also refer to the table below using the horse's height at the withers to adjust the length of the Leash. The length of the Leash is measured between the ball and the junction of the 2 straps connected to the stirrup bars.
Make sure the Leash is properly adjusted to allow correct deployment of the airbag. Incorrect adjustment of the Leash length can lead to delayed triggering of the Airbag.
